Turn of the Century baseboard register

These attractive registers come in a variety of lengths and appealing designs...in fact, we can make the faceplate in any of the turn of the century designs. The one shown in the picture above is the "classic grid" design. The heavy-duty 1/8" steel, has a powder-coat finish inside and out and an optional adjustable dial damper air control. Faceplate removes easily for duct access. Predrilled holes on the back make for easy attachment to the wall. The register measures 4.5" high with a projection of 4.5", you just need to figure out the length you need, and of course the design and color too - get busy! Choose from powdercoat black, brown, almond or paint-ready white. Custom work available.

Length	With damper	No damper
8 inches	$161.95	$139.95
10 inches	$167.95	$145.95
12 inches	$172.95	$150.95
14 inches	$182.95	$161.95
16 inches	$194.95	$172.95
18 inches	$204.95	$183.95
20 inches	$215.95	$194.95
22 inches	$226.95	$205.95
24 inches	$237.95	$215.95
26 inches	$247.95	$226.95
28 inches	$256.95	$234.95
30 inches	$263.95	$241.95
32 inches	$271.95	$249.95
34 inches	$278.95	$257.95
36 inches	$286.95	$264.50
38 inches	$294.95	$272.95
40 inches	$302.95	$280.95
44 inches	$308.95	$286.95
46 inches	$316.95	$295.95
48 inches	$323.95	$302.95

s&h:
$0-$199.95.....$11.95
$199.96-$249.95.....$14.95
$249.96 and up.....6%

Turn of the century style end cap baseboard return air vents

If your return vent is on the wall right at floor level and you want a metal piece, then these are a great way to go. We fold over the top and edges to form box. We can make the projection whatever you want, but typically it is either 3/4 inch or one inch. There are 18 different patterns to choose from and 6 finishes. They are provided with color matched screws. These are also available for locations that are not in between baseboards such as floor, wall, or ceiling.

Call us for a price quote at 509-535-5098. Cost is based on the square inches. Smaller units would be less, larger ones would be more . . .